1 / 0
Yanko Stitchdown apron boot medium brown suede
- Fast worldwide deliveries
- 14 day returns
- Fast customer service with expert knowledge
Desert boots, chukkas, with the classic crepe sole, made with a so-called Stitchdown construction. This means that the upper is turned outwards and stitched to a leather midsole, onto which the rubber sole is then attached. They can be easily re-soled by a cobbler.
A relaxed shoe model that is ideal for spring and autumn. Made on the round toe box last S292, in medium brown Repello gum oil suede from the well-known British tannery Charles F. Stead.
Note that on this type of Stitchdown construction there are often marks in the uppers from the sole stitching machine, this is normal and it often becomes less visible over time when the shoes have been worn. Also, linings and stiffeners are turned outwards (because of this, soft celastic stiffeners are used here, in order to be able to bend them in the required way) and can therefore be visible along the edge.
Construction:
Stitchdown. Upper turns outward, sewn into leather midsole, to which the outsole is attached. Can easily be re-soled.
Sole:
Crepe sole made of natural rubber.
Sizes:
The shoes are slightly small in size, most go up 0.5 in size if you have a normal / slightly wide foot (if you have a slightly narrower foot, however, most people choose the same size) compared to welted shoes from, for example, Skolyx, TLB Mallorca, Loake, Crockett & Jones and Carmina's sizes. Here you will find a detailed size guide for our shoes. If you are still unsure of your size, email ktj@skolyx.se.
Shoe care:
Saphir Medaille d'Or Super Invulner (protection against moisture and dirt). Use suede brush regularly to brush away dirt and dust.
A relaxed shoe model that is ideal for spring and autumn. Made on the round toe box last S292, in medium brown Repello gum oil suede from the well-known British tannery Charles F. Stead.
Note that on this type of Stitchdown construction there are often marks in the uppers from the sole stitching machine, this is normal and it often becomes less visible over time when the shoes have been worn. Also, linings and stiffeners are turned outwards (because of this, soft celastic stiffeners are used here, in order to be able to bend them in the required way) and can therefore be visible along the edge.
Construction:
Stitchdown. Upper turns outward, sewn into leather midsole, to which the outsole is attached. Can easily be re-soled.
Sole:
Crepe sole made of natural rubber.
Sizes:
The shoes are slightly small in size, most go up 0.5 in size if you have a normal / slightly wide foot (if you have a slightly narrower foot, however, most people choose the same size) compared to welted shoes from, for example, Skolyx, TLB Mallorca, Loake, Crockett & Jones and Carmina's sizes. Here you will find a detailed size guide for our shoes. If you are still unsure of your size, email ktj@skolyx.se.
Shoe care:
Saphir Medaille d'Or Super Invulner (protection against moisture and dirt). Use suede brush regularly to brush away dirt and dust.
Which shoe care products to use:
Before use, go over the shoes gently with a a suede brush followed by Saphir Medaille d'Or Super Invulner to protect from water and dirt. Use Saphir Medaille d'Or Suede Renovator Spray in Medium brown when the colour needs to be improved and to give some nourishment. For more thorough yet gentle cleaning we recommend Saphir Medaille d'Or Omninettoyant suede cleaner. We recommend using cedar wood shoe trees to prevent unnecessary creasing and extend the lifespan of your footwear.
Read more about how to use these products on the respective product pages, or in the shoe care guide linked below.
Basic shoe care:
- Don’t use the same pair for two consecutive days
- Brush / wipe the shoes off after use
- Use shoe trees and shoehorn
- Treat regular leather with shoe cream, treat suede and textile with waterproofing spray
Learn more on these steps in this guide.
Further shoe care info:
For more on how to clean, refresh and protect suede and nubuck, read this guide.
Before use, go over the shoes gently with a a suede brush followed by Saphir Medaille d'Or Super Invulner to protect from water and dirt. Use Saphir Medaille d'Or Suede Renovator Spray in Medium brown when the colour needs to be improved and to give some nourishment. For more thorough yet gentle cleaning we recommend Saphir Medaille d'Or Omninettoyant suede cleaner. We recommend using cedar wood shoe trees to prevent unnecessary creasing and extend the lifespan of your footwear.
Read more about how to use these products on the respective product pages, or in the shoe care guide linked below.
Basic shoe care:
- Don’t use the same pair for two consecutive days
- Brush / wipe the shoes off after use
- Use shoe trees and shoehorn
- Treat regular leather with shoe cream, treat suede and textile with waterproofing spray
Learn more on these steps in this guide.
Further shoe care info:
For more on how to clean, refresh and protect suede and nubuck, read this guide.
- MaterialSuede
- LastS292
- SoleRubber sole
- TypeBoots
- WidthF (standard)
- GenderMen
- ColorMedium brown
- BrandYanko
With the Stitchdown construction, the upper is turned outwards, sewn to a vegetable tanned leather midsole, onto which the outsole is attached with glue. They can easily be resoled by just removing the outsole from the midsole, while the sole stitch is intact.
Note that on this type of Stitchdown construction there are often marks in the uppers from the sole stitching machine, this is normal and it often becomes less visible over time when the shoes have been worn. Also, linings and stiffeners are turned outwards (because of this, soft celastic stiffeners are used here, in order to be able to bend them in the required way) and can therefore be visible along the edge.
Note that on this type of Stitchdown construction there are often marks in the uppers from the sole stitching machine, this is normal and it often becomes less visible over time when the shoes have been worn. Also, linings and stiffeners are turned outwards (because of this, soft celastic stiffeners are used here, in order to be able to bend them in the required way) and can therefore be visible along the edge.